walton g8 emmc dump file

 Walton Primo G8 GP Dump FILE  !!

suddenly your Walton Primo G8 GP Dump FILE  is crash with virus or hanging problem or bootloop,hang logo,restart problem then you need to flash firmware to fix your device. hard reset not working and doesn’t enter recovery or any kind of software issue then you need to must install stock firmware for repair you smart phone. a Smart Phone’s not working good properly without a good firmware. so android firmware program is a part of life smart phone

THE ADVANTAGE OF STOCK ROM !!

1. Flash Stock Rom To Unbrick your Walton Primo G8 GP Dump FILE  

2. Flash Stock ROM to Fix the boot loop Problem

3. Upgrade and Downgrade Walton Primo G8 GP Dump FILE  Matching By Build Version

4. Unroot or Fix Bugs on your phone

5. To fix the lag or stutter on Walton Primo G8 GP Dump FILE  By flashing Stock ROM, 

6. you can solve software problems

7. Revert back to stock to gain your warranty.

Walton Primo G8 GP Dump FILE MTK USB DRIVER !!

Flashing Before Any MTK Based Smart Phone On your PC. You Need to Install First Samsung USB Driver Then Process Installing Firmware. Without Driver Your Smart Phone Will Not Detect Boot To Your Computer . So Download Samsung USB Driver And Install Them Your PC.

Walton Primo G8 GP Dump FILE !!

Walton Primo G8 GP Dump FILE  Android Smartphone Running with Mediatek Chipset. So you Need MTK Smart Phone Flash Tool For This Device And This tool a free application for flashing Mtk device. this tools developed by mediatek company to improve their Mtk based smart phone. and also their user can use this tools using by upgrade firmware flash stock rom. you need scatter stock firmware and Mtk usb driver and some basic knowledge about how to flash with Odin flash tool. check this article.

ABOUT Walton Primo G8 GP Dump FILE  !!

HOW TO UNLOCK FRP ? ON Walton Primo G8 GP Dump FILE  !!

if you face frp lock on Walton Primo G8 GP Dump FILE  after doing flash or make factory reset. don’t worry on this post download firmware Walton Primo G8 GP Dump FILE  extract firmware and find the scatter file open it with wordpad and find frp address copy the linear start address physical start address and load scatter firmware in Odin tools go to the format tab now past address and hit format to remove frp lock and done. or if you did not this  step properly then find and Search frp reset file in this site download them with frp tools and frp address and enjoy.

WHAT SOFTWARE ISSUE WILL BE FIXED !!

Auto Restart On Off ♥ Hanging While Device Running ♥ Pin Lock ♥ Pattern Lock ♥ Face Look ♥ Privacy Lock ♥ Start Android Password ♥ Auto Fastboot Mode ♥ Auto Recovery Mode ♥ Unfortunately Android Has Stopped Virus Problem ♥ Storage Space Running Out ♥ Odin Tool Error S Not Enough Storage Space ♥ White/Black LCD After Flash Other Firmware ♠ Invalid IMEI Baseband Unknown And Dead After Flash Etc

HOW TO FLASH Walton Primo G8 GP Dump FILE  !!

1. Download Firmware , Tools, Driver, Extract All and install Driver

2. Open Flash Tools Folder Run Flashtool.exe

3. Go To Download Tab And Loading Scatter Or Choose

4. Select Scatter Tex File From Your Firmware Folder

5. After Load Firmware Hit Download Button To Flashing Progress

6. Now Power Off Your Android Device And Plug USB Cable

7. Once MTK Vcom Preloader Detected Your PC Flashing Will Start Automatically

8. Now Wait Until 100% And Successfully Installed Firmware Done

WARNING :

Before Flash Take A Backup Firmware Your Personal Data After Doing Flash Firmware Your All Personal Data Will Be Erased. and if you Are Technician We Always Advice to You Make A Backup Full Rom Then Proceed Any Operation

RESPONSIBILITY TO INSTALL IN Walton Primo G8 GP Dump FILE   !!

We Are Choes Telecom will not Responsible for any kind of Error issues that occurred During Flashing or Not Following Our Guide Properly. So If you Know Proceed this at your own risk

PAID FILE NOT FREE 

BKASH 01712030412

I hope this guide you Helpful to Flash Stock ROM on your Walton Primo G8 GP Dump FILE  Smartphone Using Odin Flash Tool. This is the Safe Solution if you Don’t Have any Professional Box And Dongle or Tools For Flashing then don’t worry You Don’t Need any Flashing Device Like Box or Dongles. Flashing Tools Inside In Firmware Folder So You Can Flash With That Tools. We All Require Tools Driver Provide Inside In Stock Rom As Each Firmware.

Walton Primo G8 GP Price in Bangladesh

nit bus...

VCC: 3.3 V, VCCQ: 3.0 V

Bus: 8 bit (HS SDR 52MHz)

Access mode: sector mode

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)

 Card/BGA: BGA (Discrete embedded) - High density MMC

 Manufacturer ID: 0x15 (Samsung)

 Product name: FNX2MB (0x464e58324d42), rev: 0x01, serial number: 0x8C31F23A

 Manufacturing date: Apr 2017

CID: 15010046 4E58324D 42018C31 F23A4436

CSD: D0270132 0F5903FF F6DBFFEF 8E40400C

EXT_CSD revision: 1.8 (MMC v5.1) 

Partition info:

 Boot1: 4 MiB

 Boot2: 4 MiB

 RPMB: 512 KiB [Authentication Key not yet programmed]

 User area: 7.28 GiB(7,818,182,656 bytes)

Cache size: 64 MiB

Hardware reset function: 1

Partition configuration: 0x48

 Boot acknowledge is sent during the boot operation

 Boot partition 1 is enabled for boot

Partitioning support: 0x07

 Device support partitioning feature

 Device can have enhanced technological features

 Device partitioning possible

Boot configuration protection: 0x00

Boot bus conditions: 0x00

Boot area write protection: 0x00

ANDROID System Info:

 platform: MT6580, cpu abi: armeabi-v7a

 manufacturer: WALTON

 board: WALTON, name: Primo_G8

 brand: WALTON, model: Primo G8

 build model list: Primo G8

 build id: NRD90M, version: 7.0 [Nougat] (Primo G8_T_W20171107_143135_V07)

 build description: full_w390d-user 7.0 NRD90M 1513225653 release-keys

Internal storage: 3.34 GiB

crypto state: unencrypted

Custom moviNAND command is not supported for this device(MMC51).

Selected: [SAMSUNG] KMFNX0012M-B214/8GB+LPDDR3 8Gb   (BGA221)