Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GX6BMB (0x475836424d42), rev: 0x03, serial number: 0xD7D507AA
Manufacturing date: Jan 2018
CID: 15010047 5836424D 4203D7D5 07AA1532
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: MT6737T, cpu abi: arm64-v8a
manufacturer: Symphony
board: P11, name: P11
brand: Symphony, model: P11
build model list: P11
build id: NRD90M, version: 7.0 Nougat (P11_HW1_V6)
build description: P11-user 7.0 NRD90M 1515133500 release-keys
crypto state: encrypted?
Symphony P11 Dump FILE !!
suddenly your Symphony P11 Dump FILE is crash with virus or hanging problem or bootloop,hang logo,restart problem then you need to flash firmware to fix your device. hard reset not working and doesn’t enter recovery or any kind of software issue then you need to must install stock firmware for repair you smart phone. a Smart Phone’s not working good properly without a good firmware. so android firmware program is a part of life smart phone
THE ADVANTAGE OF STOCK ROM !!
1. Flash Stock Rom To Unbrick your Symphony P11 Dump FILE
2. Flash Stock ROM to Fix the boot loop Problem
3. Upgrade and Downgrade Symphony P11 Dump FILE Matching By Build Version
4. Unroot or Fix Bugs on your phone
5. To fix the lag or stutter on Symphony P11 Dump FILE By flashing Stock ROM,
6. you can solve software problems
7. Revert back to stock to gain your warranty.
ITEL A33 W5001P DUMP FILE MTK USB DRIVER !!
Flashing Before Any MTK Based Smart Phone On your PC. You Need to Install First Samsung USB Driver Then Process Installing Firmware. Without Driver Your Smart Phone Will Not Detect Boot To Your Computer . So Download Samsung USB Driver And Install Them Your PC.
ITEL A33 W5001P DUMP FILE !!
Symphony P11 Dump FILE Android Smartphone Running with Mediatek Chipset. So you Need MTK Smart Phone Flash Tool For This Device And This tool a free application for flashing Mtk device. this tools developed by mediatek company to improve their Mtk based smart phone. and also their user can use this tools using by upgrade firmware flash stock rom. you need scatter stock firmware and Mtk usb driver and some basic knowledge about how to flash with Odin flash tool. check this article.
ABOUT Symphony P11 Dump FILE !!
HOW TO UNLOCK FRP ? ON Symphony P11 Dump FILE !!
if you face frp lock on Symphony P11 Dump FILE after doing flash or make factory reset. don’t worry on this post download firmware Symphony P11 Dump FILE extract firmware and find the scatter file open it with wordpad and find frp address copy the linear start address physical start address and load scatter firmware in Odin tools go to the format tab now past address and hit format to remove frp lock and done. or if you did not this step properly then find and Search frp reset file in this site download them with frp tools and frp address and enjoy.
WHAT SOFTWARE ISSUE WILL BE FIXED !!
Auto Restart On Off ♥ Hanging While Device Running ♥ Pin Lock ♥ Pattern Lock ♥ Face Look ♥ Privacy Lock ♥ Start Android Password ♥ Auto Fastboot Mode ♥ Auto Recovery Mode ♥ Unfortunately Android Has Stopped Virus Problem ♥ Storage Space Running Out ♥ Odin Tool Error S Not Enough Storage Space ♥ White/Black LCD After Flash Other Firmware ♠ Invalid IMEI Baseband Unknown And Dead After Flash Etc
HOW TO FLASH Symphony P11 Dump FILE !!
1. Download Firmware , Tools, Driver, Extract All and install Driver
2. Open Flash Tools Folder Run Flashtool.exe
3. Go To Download Tab And Loading Scatter Or Choose
4. Select Scatter Tex File From Your Firmware Folder
5. After Load Firmware Hit Download Button To Flashing Progress
6. Now Power Off Your Android Device And Plug USB Cable
7. Once MTK Vcom Preloader Detected Your PC Flashing Will Start Automatically
8. Now Wait Until 100% And Successfully Installed Firmware Done
WARNING :
Before Flash Take A Backup Firmware Your Personal Data After Doing Flash Firmware Your All Personal Data Will Be Erased. and if you Are Technician We Always Advice to You Make A Backup Full Rom Then Proceed Any Operation
RESPONSIBILITY TO INSTALL IN Symphony P11 Dump FILE !!
We Are Choes Telecom will not Responsible for any kind of Error issues that occurred During Flashing or Not Following Our Guide Properly. So If you Know Proceed this at your own risk
PAID FILE NOT FREE
BKASH 01712030412
I hope this guide you Helpful to Flash Stock ROM on your Symphony P11 Dump FILE Smartphone Using Odin Flash Tool. This is the Safe Solution if you Don’t Have any Professional Box And Dongle or Tools For Flashing then don’t worry You Don’t Need any Flashing Device Like Box or Dongles. Flashing Tools Inside In Firmware Folder So You Can Flash With That Tools. We All Require Tools Driver Provide Inside In Stock Rom As Each Firmware.
Symphony P11 DUMP Price in Bangladesh
No comments:
Post a Comment